In addition to the more regularly used views such as 3D, plan & cross section, Lineardraft allows you to view your structures in a number of different orientations.
- Select 'View Back' button
Follow the prompt to select a structure.
Select a Structure
Once you have chosen a structure, a backward facing, cross sectional view in a decreasing chainage direction will be displayed.
- Select 'View Left' button
Follow the prompt to select a structure.
Select a Structure
Once chosen, the structure will be shown aligned 90° clockwise around the Z-axis from the cross-section view with the clip volume on.
- Select 'View Right' button
Follow the prompt to select a structure.
Select a Structure
Once chosen, the structure will be shown aligned 90° counter-clockwise around the Z-axis from the cross-section view with the clip volume on.
- Select 'View Top' button
Follow the prompt to select a structure.
Select a Structure
Once you have chosen a structure, Lineardraft will display the structure in a top view with the track lines aligned along the X-axis of the view with the clip volume on.
Note: All of the above views will display the chosen structure with the clip volume on. Adjusting the clip volume values for every structure would require a change to your project presets, however your clip volume can be adjusted per structure by editing the 'Elevation' width & depth values on the 'Settings' form with 'Structure Adjust'.